-
hamos RSS
Elastomer
Separators
Separation of elastomers from plastics
The hamos RSS elastomer separator is used for the dry separation of rubber and other elastomers from plastic regrind. The hamos RSS was developed to produce high-quality plastic regrind such as PP, PS and ABS as a largely rubber-free fraction in a dry process.
In order to achieve optimum separation results with the hamos RSS, the plastic mixtures to be separated must have the following properties:
- Dry plastics
- Particle size 2 mm to 10 mm
- Dedusted material (fine dust should be separated)
- Maximum humidity less than 0.5 %
Not sure whether your material is suitable for separation with the hamos RSS? Talk to our experts. We would be happy to carry out a separation test in our technical centre to examine the separability of your material.
Based on our test report, which we carry out on the basis of the separation results with your materials, we offer you customised devices and systems.
The plastic mixture contaminated with rubber should be dust-free, dry and smaller than 10 mm in order to achieve an optimum separation result. The contaminated plastic fraction is collected in a silo, for example, and conveyed to the storage hopper of the elastomer separator.
In the hamos RSS separator, almost all elastomers are now separated. The result is a clean, practically rubber-free plastic regrind that can be transported away by a screw conveyor, for example, and filled into big bags.
Thanks to optimised machine settings, the hamos RRS also produces a highly concentrated rubber fraction.
- Clean, rubber-free plastics
- Dry separation process
- High output
- Low loss of good material
- Concentrated elastomer waste
- Fully automatic function
- Low energy consumption
- High economic efficiency
If, for example, you are processing electronic waste from recycling or the shredder light fraction, then the hamos RSS is the ideal device for separating contaminants from rubber or other elastomers.
Professionals work with professionals
The separation systems supplied by hamos are an essential part of ensuring the highest quality
of the products supplied to the market by Metal-Plast.
By using hamos solutions, we have increased the processing capacity of our plant and
The products manufactured by Metal-Plast are of the highest quality.
- Grzegorz Jasiński, Chairman of the Board
We are very satisfied with the standard that hamos GmbH has achieved. Previously, it was not possible to sort PVC from profile offcuts and production waste fully automatically to this high standard of quality and purity. This development has helped us to completely close the material cycle in window profile production. A new world-class standard was born.
- Jörg Ipfling, Manager Recycling Technology Window Solutions at Rehau
After 21 years of operation, our experience with the hamos WRS window recycling system has been very positive. The plant is a
important part of our process. It helps us to achieve our targets. It guarantees the highest quality required for
the PVC is required, thus increasing the overall performance of our process.
The hamos system has become indispensable and "closes our recycling loop."
- Bodo Streubel, Operations Manager of Dekura Bad Schmiedeberg
The electrostatic recycling systems from HAMOS make a very important contribution to the recycling process thanks to their good separation performance.
Contribution to the recycling process of PVC windows.
- ppa. S. Lengnick, Production Manager, VEKA Umwelttechnik GmbH
We are a premium partner of
EN 
DE 
AR 
CS 
NL 
FR 
IT 
JA 
PL 
PT 
ES 
TR